This guide covers the writing process for a B2B sales email, one step at a time: choosing who to write to, the research, the first line, the problem and the ask, then cutting, checking and reading the replies. One invented email runs through every step, in three drafts. For what a cold email is and the rules around it, read what is cold email; for ready-made frames, see the cold email templates. Writing to a company about a job is a different task and is not covered here. A note on bias: Ace Digital sells a service that books meetings by email, so we have a stake in how cold email is written. Our own service appears once, at the end.
What are the steps to write a cold email?
Writing a cold email takes nine steps: choose one person and one reason to write now, research what is true about them, write the first line, state the problem in their words, make one ask, cut, read it as the recipient, check it before sending and judge the replies. Most of the work happens before the first sentence.
| Step | What you end up with | Done when |
|---|---|---|
| 1. One person, one reason | A name and a recent change at their company | You can say in one sentence why this person, this month |
| 2. Research | Two or three facts, each with its source and date | You have a fact for the first line and one for the problem |
| 3. First line | One sentence about them | It could not be sent to anyone else on your list |
| 4. The problem | One or two sentences in their words | The key words could appear in their own job post or interview |
| 5. One ask | A question they can answer in a few words | There is nothing else for them to decide |
| 6. Cut | A shorter draft | The email fits on a phone screen, signature included |
| 7. Read as the recipient | A list of open questions | Who, why me, why now, what you want and how to say no are all answered |
| 8. Pre-send check | An email ready to go | Facts, names, subject, signature and opt-out are checked |
| 9. Judge the replies | Replies sorted by type | You know which step to change next |
The example in this guide is invented: Brennick Cold Storage, Lena Ortmann, Tidewell Refrigeration Services and Marco Liu are fictional, the facts about them are made up and the email was never sent. Marco sells preventive maintenance and on-call repair for industrial refrigeration in central Ohio, and Brennick runs refrigerated warehouses.
Who should you write to, and why now?
Write to one person who owns the problem you solve, with one reason to write this month rather than any other month. The reason is a recent, checkable change at their company, such as a new site, a hire or a launch. If you cannot name both the person and the reason, the email is not ready to write.
- The person. Whoever would have to deal with the problem. Job postings often say who a role reports to, and team pages and the person's own posts show what they own.
- The reason. A recent change gives the email a date, and the reader can check that you are right about it.
- The test. Say out loud: I am writing to this person because this happened, and it usually means this. If the sentence needs the word maybe twice, pick another person or wait for a better reason.
In the example, Marco's list has dozens of cold storage operators. He picks Brennick because it is opening a second site in Columbus, and Lena because the job posting for the new site's maintenance supervisor says the role reports to her, the VP of Operations. The reason to write now: the site opens in March and the supervisor has not been hired yet.
What should you research before writing?
Research for a cold email means finding two or three facts about the person and the company that are true, recent and connected to what you sell, and writing down where each one came from. Stop when you have one fact for the first line and one for the problem. Anything extra goes into the follow-up.
- Where to look: careers and news pages, the person's own posts, talks and interviews, release notes, and what their customers say in public reviews.
- What to save: the fact, the page and the date, next to the person's row, so you can check it again on the day you send.
- What is missing: anything you would need to know and could not find. The gap decides how the ask is worded.
- What to leave alone: anything the person did not knowingly make public, and their private life.
| What he found | Where | What it lets him say |
|---|---|---|
| The Columbus site opens in March | A news post on Brennick's website | Why now |
| The site's maintenance supervisor will report to the VP of Operations, and the job is still open | Brennick's careers page | Why Lena, and where the gap is |
| Lena said the first summer in a new building is when you find out how the system behaves | A Q&A on Brennick's blog | The problem, in her words |
| Columbus uses a different refrigeration system from the first site | The same news post | A new angle for the follow-up |
| Not found: who maintains the systems today | Nothing public | The ask has to allow the answer that it is already covered |
How do you write the first line?
The first line of a cold email states one fact about the reader that is true, specific and checkable, in plain words, with no filler greeting and no introduction of yourself. A quick test: if the same line could go to anyone else on your list, it is not a first line yet. Say where you saw the fact.
- Weak: "I hope this email finds you well." It says nothing about the reader and uses the most valuable line in the email.
- Weak: "My name is Marco and I work at Tidewell." The From line and the signature already say that.
- Weak: "Congratulations on the growth!" It could go to any company that has grown, which is most of them.
- Strong: "Brennick's careers page says the Columbus site opens in March and its maintenance supervisor will report to you." It is about her, it is checkable and it tells her where the sender looked.
After the subject, the first line decides whether the rest gets read, so it carries the one fact that shows the email was written for this reader. Leave flattery out: praise from a stranger reads as the start of a pitch.
How do you describe the problem in the reader's words?
Describe the problem in one or two sentences, using the words the reader would use, and tie it to the fact in your first line. Take those words from their job posts, interviews and posts, and from your own sales calls with similar buyers. Leave out the vocabulary of your product pages, which the reader has never used.
| How Tidewell's website says it | How Lena said it |
|---|---|
| Unplanned downtime | The first summer in a new building |
| Preventive maintenance programs | Finding out how the system behaves |
Marco's problem sentence uses Lena's phrase and adds one consequence she can check against her own plans: "If the supervisor isn't hired by then, that summer lands on whoever is on site." It does not dramatize the risk. One problem, said the way she would say it, is enough for her to decide whether it applies.
What should the call to action ask for?
A cold email should end with one ask that the reader can answer in a few words, such as whether the problem is already covered or whether a short call would help. Each extra request, attachment or link gives the reader one more thing to decide, and the easiest way to decide several things is to answer none.
A small question tends to suit a first email better than a request for a fixed slot in the calendar. Gong Labs analyzed 304,174 emails from its users for a study published in May 2020. Asking whether the reader was interested did best on cold emails, with success counted as a meeting booked within 10 days, according to Gong's write-up; once a deal was under way, proposing a specific day and time did better. The evidence is mixed, though: Instantly's 2026 report recommends simple requests such as "Worth a quick call?" and quotes an agency founder whose best call to action of 2025 asked for a couple of minutes to chat over the next few days. What both sources favor is an ask that costs the reader little to answer.
Word the ask around what your research could not find. Marco does not know who maintains Brennick's systems today, so his question leaves room for that answer: "Is coverage for Columbus already taken care of, or would a short call help?" A yes, a no and a not yet are all one-line replies, and each tells him something.
How much should you cut from the draft?
Cut a cold email until every sentence helps the reader decide whether to reply and the whole message, signature included, fits on a phone screen. Length on its own moves replies very little: in Hunter's analysis of its users' cold emails, average reply rates barely changed between short and long emails. Cut for clarity first.
- Your introduction. Move it to the signature and one plain line about what you do.
- The company paragraph. One sentence on what you do for people like the reader is enough.
- Claims the reader cannot check, such as "trusted by leading companies".
- A second problem, a second ask and anything after the signature.
- Pleasantries at the start and the end that would fit any email.
The figures that circulate come from tool vendors' own users. Hunter's analysis of 34 million cold emails sent between 2022 and 2024 found the highest average reply rate for emails of 20 to 39 words. In Hunter's table that band averaged 4.5%, while the next one, 40 to 59 words, had the lowest average, 3.4%. Its author calls the difference small and notes that the study counts every reply, positive or negative. Instantly says in its 2026 benchmark report that its best-performing senders average under 80 words in the first email, based on what it describes as billions of cold email interactions on its platform in 2025. Neither can be checked from outside, and neither shows that cutting words causes replies.
How do you read a draft as the recipient?
Read the draft as the recipient would: on a phone, between meetings, with no idea who you are. Check that the first few lines answer five questions: who is writing, why me, why now, what do you want and how easy is it to say no. Any question left open is a reason for the reader to delete it.
- Read it on your phone, not in the editor, and read it aloud once. Sentences that are hard to say are hard to read.
- Imagine the reader forwarding it to their boss, and cut anything you would not want the boss to see.
- Look for anything the reader cannot verify, and either add where it came from or cut it.
- Ask a colleague who does not know the account to read it for ten seconds and tell you what you want. If they cannot, the ask is not clear.
What does a typical first draft get wrong?
A typical first draft of a cold email opens with the sender, lists several problems in vendor language, makes claims the reader cannot check and asks for more than one thing. The invented first draft below has all four faults and two more. That is normal: the first pass gets the material down, and the next two passes fix it.
- First draft, subject: Tidewell Refrigeration Services: partnership opportunity
- Hi Lena, my name is Marco Liu and I'm the business development manager at Tidewell Refrigeration Services, a full-service industrial refrigeration company serving central Ohio. Our certified technicians handle preventive maintenance programs, ammonia and CO2 systems and round-the-clock emergency response.
- I noticed Brennick is expanding, congratulations! Many cold storage operators struggle with unplanned downtime, rising energy costs and compliance requirements, and our clients count on us to keep their facilities running smoothly.
- I'd love to set up a half-hour call to walk you through our services. Are you free Tuesday morning or Thursday afternoon? I've also attached our capabilities brochure, and if you're not the right person, could you point me to whoever is?
- Best, Marco
Here is what is wrong with the first draft, and which step fixes each fault:
- It opens with the sender: two sentences about Tidewell before a word about Lena. Step 3 puts her first.
- The only fact about Brennick is vague, expanding, and sits in the second paragraph. Step 2 replaces it with facts she can check.
- It names three problems in vendor language, none of which Lena has said she has. Step 4 uses her own phrase.
- It makes a claim she cannot check, that clients count on Tidewell. Steps 6 and 7 cut it.
- It asks for four things: a call, a choice of two slots, a look at an attachment from a stranger and a referral. Step 5 leaves one question.
- The subject line is about the sender. The guide to cold email subject lines covers what a subject has to do.
How does the same email read after two more passes?
After two more passes the same cold email leads with the reader's situation, names one problem in her own words, says what the sender does in one line and asks one question. The second pass fixes the order and the facts. The third cuts what is left and checks the draft the way Lena would read it.
- Second draft, subject: the Columbus maintenance role
- Hi Lena, I saw on Brennick's careers page that the maintenance supervisor for the new Columbus site will report to you, and that the site opens in March.
- In the Q&A on your blog you said the first summer in a new building is when you find out how the system behaves. That is often when the maintenance team is still being hired.
- Tidewell Refrigeration Services is a full-service industrial refrigeration company in central Ohio. We run preventive maintenance and round-the-clock emergency response for ammonia and CO2 systems, and we can cover a site until the in-house team is in place.
- Would a half-hour call next week make sense? I can also send our capabilities brochure if that's easier.
- Marco Liu, Tidewell Refrigeration Services
The second draft has the right order and a fact Lena can check, in her own words. It still has a feature list where one line would do, two asks, and no mailing address or way to opt out. The third pass fixes those:
- Third draft, subject: Columbus, before the first summer
- Hi Lena, Brennick's careers page says the Columbus site opens in March and its maintenance supervisor will report to you.
- In your blog Q&A you said the first summer in a new building is when you find out how the system behaves. If the supervisor isn't hired by then, that summer lands on whoever is on site.
- We maintain industrial refrigeration in central Ohio and can cover a new site until its own team is in place.
- Is coverage for Columbus already taken care of, or would a short call help?
- Marco Liu, Tidewell Refrigeration Services, followed by the company's mailing address. If you'd rather not hear from me, reply "no" and I won't write again.
Read as Lena: who is writing (a refrigeration maintenance firm in Ohio), why her (the new role reports to her), why now (the site opens in March and the role is open), what he wants (to know whether coverage is taken care of) and how easy it is to say no (one word). Counted from the greeting to the sender's name, the third draft has 96 words against 116 in the first, still above the under-80 average that Instantly's report gives for its best senders' first emails. Add the mailing address and opt-out line, which the first draft lacked, and the two are the same length. Cutting further would mean dropping Lena's own words or the consequence after them, the two sentences that make the email hers, and Hunter's figures above suggest word count alone changes little. What changed is what the words are about: in the first draft most of them describe Tidewell, and in the third most of them describe Lena's situation. It still has to pass the checks in the next section before it goes out.
What should you check before you press send?
Before you press send, check the facts, the mechanics and the rules: every fact still true and saved with its source, no placeholder left, a subject that matches the body, one ask, and a signature with your real name, company, mailing address and a working way to opt out. Then send a test to yourself.
- Facts. Open each source again on the day you send. The job may be filled or the news may be old.
- Names. The person's name, title and company written the way they write them.
- Placeholders. No curly braces, no empty fields and no "Hi there" where a name should be.
- Subject. It says what the email is about and matches the body.
- One ask, no attachment, and at most one link, ideally none.
- The rules. In the US, commercial email must not use false or misleading header information or deceptive subject lines, must be identified as an ad, must include a valid physical postal address and must tell recipients how to opt out, according to the FTC's CAN-SPAM guide. Opt-out requests must be honored within 10 business days, and the same guide says the law makes no exception for business-to-business email. That is what the law asks for in the US, and it does not mean sending is allowed; other countries start from different rules, summarized in what is cold email. Ask a lawyer to review your case.
- The sending domain. SPF, DKIM and DMARC set up and passing, as explained in the guide to SPF, DKIM and DMARC.
- A test. Send it to yourself and read it on a phone and a laptop.
- A stop rule. A reply, an opt-out or a bounce stops every later email to that person.
When should you write the follow-ups?
Write the follow-ups in the same sitting as the first email, from the research you did not use, so each one adds something new and stays tied to the same reason. Most of the writing effort still belongs to the first email, which in Instantly's platform data brings in more replies than all the follow-ups together.
In platform data from January 1 to December 18, 2025, the first email in a sequence produced 58% of replies and later steps the other 42%, according to Instantly's 2026 benchmark report. Marco's follow-up uses the fact he saved for it: the Columbus site runs a different refrigeration system from the first one, so the new team will be learning it during that first summer. Frames for the first and second follow-up and for the last email are in the eight cold email templates by situation.
How do you judge the replies you get?
Judge a cold email by the replies it gets from the right people and the meetings that follow, then read every negative reply for what it says about your process. A no from the wrong person points at step one, while a reply asking what you mean points at the first line, the problem or the ask.
- "Not my area", or a forward to a colleague: the person was wrong. Thank them and write to the person they named.
- "We already have this covered": the reason was real but the gap was not. Note it; the ask allowed for it.
- "What is this about?": the first line or the problem was unclear. Rewrite them before the next batch.
- "Send me some information": some interest, no urgency. Reply with one useful thing about their situation and skip the brochure.
- Opt-outs and complaints: the reason did not apply to that person. Check how the list and the reasons were chosen before sending more.
- Silence: on its own it tells you little. Only many sends with no replies point clearly at the list or the reason.
Published averages give rough context and no more. Instantly's 2026 report puts the overall reply rate on its platform at 3.43%, counting all replies received, follow-ups included, against emails sent, and Hunter's analysis found averages between 3.4% and 4.5% across its length bands. Both describe their own users' sending, with lists and offers you cannot see, so set your baseline from your own first sends and compare each change against it.
A reply is not the end point. Count the meetings that are booked and then held, because getting from an interested reply to a call on the calendar is its own job, the one described in what appointment setting is.
Writing this way takes time for every person, and it is the part of cold email that does not scale well. If you would rather hand over the list, the writing and the replies, a cold email agency does that work. Ace Digital is one option: through our booked meetings service we write each first email by hand for one person at one company, and a person reads every reply.
Frequently asked questions
What if you cannot find anything true to say about the person?
Then do not email that person yet. Pick someone else at the company whose role connects to a public fact, wait for a real trigger such as a hire or a launch, or drop the row. A generic compliment or an invented observation is worse than no email at all, because the reader can usually tell it is empty.
Should you introduce yourself at the start of a cold email?
No. The reader learns who you are from the From line and the signature, and one plain sentence in the body can say what you do. Opening with your name and job title spends the first line, the one that decides whether they keep reading, on the part of the email they care about least.
Is it better to ask for a call or to ask whether they are interested?
For a first email, keep the ask small. Gong Labs analyzed 304,174 emails from its users in a 2020 study and found that asking about interest did best on cold emails, counting meetings booked within 10 days. Instantly's 2026 report also suggests a light request such as "Worth a quick call?" Save a specific day and time for later.
How many drafts does a cold email need?
Plan on at least three passes: one to get the material down, one to put the reader first and fix the facts, and one to cut and read it as the recipient would. A short email still needs them, because the hard part is choosing what to leave out, and that is easier with some distance from the first draft.
Can you write to two people at the same company?
You can, but give each person a reason tied to their own role, and do not send both on the same day with the same text, because colleagues compare notes. If several people at each account matter, plan the whole account together, which is the idea behind account-based marketing.
